Re: Slow ssh logins when running nslcd
[Date Prev][Date Next] [Thread Prev][Thread Next]Re: Slow ssh logins when running nslcd
- From: Daniel Macdonald <D.R.MacDonald [at] salford.ac.uk>
- To: "nss-pam-ldapd-users [at] lists.arthurdejong.org" <nss-pam-ldapd-users [at] lists.arthurdejong.org>
- Subject: Re: Slow ssh logins when running nslcd
- Date: Fri, 28 Jan 2022 12:24:14 +0000
I should've also included this:
#
# /etc/pam.d/common-auth - authentication settings common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of the authentication modules that define
# the central authentication scheme for use on the system
# (e.g., /etc/shadow, LDAP, Kerberos, etc.). The default is to use the
# traditional Unix authentication mechanisms.
#
# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules. See
# pam-auth-update(8) for details.
# here are the per-package modules (the "Primary" block)
auth [success=2 default=ignore] pam_unix.so nullok
auth [success=1 default=ignore] pam_ldap.so minimum_uid=1000 use_first_pass
# here's the fallback if no module succeeds
auth requisite pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
auth required pam_permit.so
# and here are more per-package modules (the "Additional" block)
auth optional pam_cap.so
# end of pam-auth-update config
From: Daniel Macdonald
Sent: 27 January 2022 17:21 To: nss-pam-ldapd-users@lists.arthurdejong.org <nss-pam-ldapd-users@lists.arthurdejong.org> Subject: Slow ssh logins when running nslcd
I'm setting up a Ubuntu 20.04 server that needs to run nslcd to authenticate with LDAP on a Windows 2016 server. If I stop the nslcd service, ssh logins to this server are instant (with keys) and the password prompt appears immediately if the user doesn't have
a key configured however when nslcd is running ssh logins take about 20 seconds or longer. Authenticating against LDAP isn't slow either unless sshd is running.
I've followed a few guides to reduce ssh login times but it hasn't made much difference. The only thing that fixes it is stopping nslcd so I presume its a either a nslcd or pam config problem. I tried disabling ssh key auth but that didn't make any notable
difference and that it a feature I would like to keep enabled.
-------------------------------------------------------------------------------------
# /etc/nslcd.conf
# nslcd configuration file. See nslcd.conf(5)
# for details.
# The user and group nslcd should run as.
uid nslcd
gid nslcd
# The location at which the LDAP server(s) should be reachable.
uri ldap://uos-p-rodc-11.isdads.salford.ac.uk:389
# The search base that will be used for all queries.
base dc=isdads,dc=salford,dc=ac,dc=uk
# The LDAP protocol version to use.
#ldap_version 3
# The DN to bind with for normal lookups.
binddn LDAP-P-CSE1@ISDADS.SALFORD.AC.UK
bindpw LDAPPASSWORDHERE
# The DN used for password modifications by root.
#rootpwmoddn cn=admin,dc=example,dc=com
# SSL options
ssl off
tls_reqcert never
#tls_cacertfile /etc/ssl/certs/ca-certificates.crt
# The search scope.
scope sub
timelimit 10
pagesize 1000
referrals off
idle_timelimit 800
filter passwd (&(objectClass=user)(!(objectClass=computer))(uidNumber=*)(unixHomeDirectory=*))
filter group (objectClass=group)
map passwd uid sAMAccountName
map passwd homeDirectory unixHomeDirectory
map passwd gecos displayName
map passwd loginShell "/bin/bash"
filter shadow (&(objectClass=user)(!(objectClass=computer))(uidNumber=*)(unixHomeDirectory=*))
map shadow uid sAMAccountName
map shadow shadowLastChange pwdLastSet
-------------------------------------------------------------------------------------
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.
passwd: files ldap
group: files ldap
shadow: files ldap
gshadow: files
hosts: files mdns4_minimal [NOTFOUND=return] dns
networks: files
protocols: db files
services: db files
ethers: db files
rpc: db files
-------------------------------------------------------------------------------------
# $OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
Include /etc/ssh/sshd_config.d/*.conf
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none
# Logging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
PubkeyAuthentication yes
# Expect .ssh/authorized_keys2 to be disregarded by default in future.
#AuthorizedKeysFile .ssh/authorized_keys .ssh/authorized_keys2
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to yes to enable challenge-response passwords (beware issues with
# some PAM modules and threads)
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# Allow client to pass locale environment variables
AcceptEnv LANG LC_*
# override default of no subsystems
Subsystem sftp /usr/lib/openssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
-------------------------------------------------------------------------------------
#
# /etc/pam.d/common-session - session-related modules common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define tasks to be performed
# at the start and end of sessions of *any* kind (both interactive and
# non-interactive).
#
# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules. See
# pam-auth-update(8) for details.
# here are the per-package modules (the "Primary" block)
session [default=1] pam_permit.so
# here's the fallback if no module succeeds
session requisite pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
session required pam_permit.so
# The pam_umask module will set the umask according to the system default in
# /etc/login.defs and user settings, solving the problem of different
# umask settings with different shells, display managers, remote sessions etc.
# See "man pam_umask".
session optional pam_umask.so
# and here are more per-package modules (the "Additional" block)
session required pam_unix.so
session [success=ok default=ignore] pam_ldap.so minimum_uid=1000
session optional pam_systemd.so
# end of pam-auth-update config
Thanks
|
- Slow ssh logins when running nslcd,
Daniel Macdonald
- Re: Slow ssh logins when running nslcd, Daniel Macdonald
- Re: Slow ssh logins when running nslcd, Daniel Macdonald
- Re: Slow ssh logins when running nslcd, Arthur de Jong
- <Possible follow-ups>
- Re: Slow ssh logins when running nslcd, Daniel Macdonald
- Prev by Date: Slow ssh logins when running nslcd
- Next by Date: Re: Slow ssh logins when running nslcd
- Previous by thread: Slow ssh logins when running nslcd
- Next by thread: Re: Slow ssh logins when running nslcd